Basic Lighter Care
Written by Brian Mallikarjunan on March 11, 2010 – 8:29 am -A refillable lighter represents an investment. These devices can offer many years of reliable service but, like any product designed to last, they must be maintained and, of course, cleaned from time to time. This process is quite easy and, depending on what type of lighter one has opted to buy, it usually takes no more than a few minutes.
Liquid fuel lighters require more maintenance and cleaning that other types of refillables. While liquid fuel is reliable, will ignite in very high winds and is very inexpensive, even for the highest-end fuels, it does not burn as efficiently as butane. Therefore, it tends to leave behind traces of carbon and other impurities left behind when the lighter is lit. Cleaning this, conveniently enough, is best done with lighter fluid which is an excellent solvent. Lighter fluid may be added to the tip of a cotton swap and used to remove the black patches that tend to develop around the windscreen. Also pass the swab near the areas where the flint wheel and flint are set to ensure that these function correctly.
A butane lighter requires little cleaning. Butane burns very efficiently and leaves hardly any traces behind. Particularly where the torch lighters are concerned, there is almost never an occasion where one will find a black spot on their lighter. If there is, it can usually be removed by simply wiping it away with dry cotton or a cloth. If the jet area becomes obstructed, simply tap the lighter gently on a hard surface to dislodge the debris.
On any lighter, the flint or electric lighting mechanism should never be forced. If there is resistance, check to see if an obstruction is present before adding pressure. Most often, a piece of dust or lint will have become lodged in the wheel. It can be removed from a flint style lighter by simply removing the flints and spinning the wheel to clear the obstruction.
Cleaning the exterior of the lighter should be done with great care. Generally, a bit of warm water and a rag is the safest way to clean off the case and it should serve to remove most smudges and stains. If something stubborn is found on the surface, one should consult with the manufacturer to see what solvent is the best for removing the material. In many cases, lighter fluid will serve as an excellent solvent on metal lighters.
Brian is a business consultant of an online specialty lighters store and has expert knowledge of cigar accessories, including Colibri lighters.
Posted in Life Style | No Comments »